Recent Sold Cues

04/14/10

Home
RJH Custom Cues
Cue Maker's Cue
Recent Sold Cues
Photo Gallery
Available Cues
Cases & Accessories
Exotic Woods
Inlay Designs
Wrap Chart
Repairs
Contact
Who uses RJH

Hit Counter

    

     We will update this page frequently, come back often

to see some of Richard's new cues!

 

 

Description:

This cue features a highly figured curly maple forearm and handle.  4 super long ebony spear-head points with ivory inlays.  Jet black Gaboon ebony is used for the butt sleeve of this cue.  The butt sleeve of this cue is loaded with ivory inlays.  Alternating diamonds and dots are inlaid into the solid ebony rings of this beauty.  Curly maple butt cap and an 1/2 inch ivory joint is used for this cue.  This cue comes with 2 shafts, 1 standard RJH Custom Cues shaft at 13 mm. and 1 Predator shaft.  Both have Moori tips.  This cue was sold to Dennis Scurto in Brooklyn, New York

 

Description:

This cue was made for a gentleman by the name of Richard Lew of New Jersey.  This cue features a highly figured cocobolo forearm and butt sleeve.  A beautiful bird's eye maple handle was used for this cue.  Birdseye maple points were used in the forearm, cocobolo points facing each other in the handle.  The cue finishes off with a set of bird's eye maple diamonds.  Alternative ivory joint gives this cue a classic look.

 

Description:

Here's another cue for my loyal customer Shigehiro from Japan.  This jump/break cue matches his playing cue he had purchased previously (scroll down to see his playing cue).  A solid ebony forearm & butt sleeve was used for this J/B cue.  The curly maple handle separates the jet-black forearm and butt sleeve.  Authentic Uni-Loc jump joint makes this cue a snap to separate.  Ebony & genuine ivory slotted ring was installed above the phenolic butt cap.  This cue was sold to Shigehiro

 

Description:

This cue was made for a gentleman by the name of Taku from Japan.  He is a friend of Shigehiro.  Taku designed this beauty and emailed the specs to Richard and the cue was made to his specifications.  If anyone who's interested to design his/her cue, send a scanned copy of your drawing to Richard, and he'll work out the details with you 1-on-1,  in a few months you'll have a wand that will not get anymore personal. 

This cue features a highly figured curly maple forearm w/4 long, 4 short spliced Gaboon ebony points.  Micarta diamonds and mother-of-pearl inlays surround the points.  Gaboon ebony butt sleeve is used for this beauty.  The butt sleeve is loaded with Mother-of-pearl inlays and Micarta diamonds.  American Holly (ivory wood) is used for the rings.  Mother-of-pearl spears and dots are inlaid into the holly rings.  Micarta joint and authentic Uni-Loc joint screw gives the cue a super solid hit!  Smooth black leather wrap finishes this beauty.

 

 

Description:

This cue features a highly figured Curly Maple forearm w/ hand spliced 4 long-4 short extra fancy cocobolo points.  4 large, super sharp elephant ivory diamond, inlaid into each long point on the forearm.  Reverse design was used for the butt sleeve.  Cocobolo rings with 8 ivory diamond inlays at position A,B,C,D & E.  Genuine ivory joint and butt cap.  Uni-loc Joint system was used for this cue.  Cue comes with 2 - 12.75 mm shafts both equipped with ivory ferrule and Moori medium tips.  Dark brown Stack Leather Wrap.  Cocobolo joint protectors with ivory inlay.  56 total ivory inlays in this cue.  Cue weighs 19.1 oz.

 

Description:

This cue features a jet-black Gaboon ebony forearm w/ 6 extra-long holly points.  Another snakewood point with a turquoise diamond is inlaid within each of the holly points.  Butt sleeve of this cue is made with a super-figured piece of snakewood.  6 turquoise diamonds bordered with holly are inlaid into the butt sleeve.  Single nickel-silver ring at position A, B & E.  Solid ivory joint with Uni-Loc screw configuration.  Genuine ivory butt cap with custom engraving.  Custom dyed Stack leather is used to wrap this beautiful cue.  Shaft diameter is 12.75mm and a buffalo horn ferrule and a medium hardness Moori tip is used for the shaft.  Cue weighs 20.2 oz.

 

Description:

This cue features a curly maple forearm w/ 4 long Gaboon ebony points with ivory inlays & 4 short purpleheart points.  Butt sleeve is solid ebony w/ 20 genuine ivory inlays.  Sterling silver stitch rings at position C, D & E.  3/8-10 flat-faced ivory joint configuration.  Black Stack leather wrap.  1 Shaft w/ ivory ferrule and medium Moori tip.  Cue weighs 18.1 oz.

 

Description:

This cue is custom ordered by Shigehiro Miki from Japan.  This cue features a superb figured curly maple forearm w/ 4 extra long Gaboon ebony points.  Mother of pearl slotted diamonds are inlaid into each point.  Gaboon ebony butt sleeve with another 4 mother of pearl slotted diamond inlays.  Genuine ivory slotted rings at position A, B & E.  Flat-faced Radial joint configuration.  Black Stack leather wrap is used for this beautiful cue.  1 super white rock maple shaft at 12.5mm w/ 12 inch stiff pro taper and 1 Predator shaft.  Custom Joint protectors.  Cue weighs 18.7 oz.

 

Description:

This jump/break cue is ordered Kenshi from Japan.  This cue features a curly maple forearm w/ 4 long cocobolo points.  Curly maple butt sleeve w/ fancy cocobolo butt cap.  Name "Kenshi" engraved into butt cap.  Cocobolo w/ micarta slotted rings are used at position A, B & E.  Authentic Uni-Loc jump/break joint.  1 extra stiff shaft at 13.5mm w/ 1/2 inch aegis ferrule and water buffalo tip for maximum breaking power.  Cue weighs 17.5 oz.

 

Description:

This wrapless cue is made of Costa Rico Cocobolo and Bird's eye maple.  3 up/3 down Ebony points with Holly inlays.  Arrows above and below wrap area are inlaid in malachite.  Cocobolo/Micarta stitched rings are used for joint rings.  This cue was sold to Louis "Dean" LaRocco, lead singer/guitarist of the band "Level Six".  www.LevelSix.net.

 

 

Description:

This all ebony beauty is made for Mr. Hank Horgan of Kansas.  Gaboon ebony was used for forearm and butt sleeve.  Genuine ivory slotted rings at position C, D & E.  Black Stacked leather wrap.  This cue has 2 shafts, 1-Predator shaft and 1-13.5mm break cue shaft.

 

 

Description:

This break cue was sold to Mr. Osborn Sayers of Brooklyn, New York.  This cue features a highly figured Bird's eye maple forearm and handle.  4 Tulipwood points and tulipwood butt cap.  Natural phenolic joint w/single brass ring.  13.5mm shaft for maximum break power.

 

 

 

Home | RJH Custom Cues | Cue Maker's Cue | Recent Sold Cues | Photo Gallery | Available Cues | Cases & Accessories | Exotic Woods | Inlay Designs | Wrap Chart | Repairs | Contact | Who uses RJH

This site was last updated 04/14/10